27
YAESU
with RJ45 Microphone Connectors and most, but not all Yaesu FM rigs
INPUT
SIDE
Pin #
1
Blue Shunt Jumper to
Pin 1 - OUTPUT Side
2
White Jumper to
PTT GND – INPUT Side
3
White Jumper to
PTT - OUTPUT Side *
4
White Jumper to
MIC - OUTPUT Side *
5
White Jumper to
MIC GND – INPUT Side
6
Blue Shunt Jumper to
Pin 6 - OUTPUT Side
7
Blue Shunt Jumper to
Pin 7 - OUTPUT Side
8
Blue Shunt Jumper to
Pin 8 - OUTPUT Side
OUTPUT
SIDE
Pin #
2
White Jumper to
PTT GND – OUTPUT Side
3
White Jumper to
PTT - INPUT Side *
4
White Jumper to
MIC - INPUT Side *
5
White Jumper to
MIC GND – OUTPUT Sid
e
* - Crisscrossed White Jumper
RECEIVE AUDIO AVAILABLE ON THE MIC CONNECTOR
On some radios output audio is available on a mic connector pin and therefore can be obtained with
jumpering on the P1 jumper block inside the
RIGblaster pro
. Consult the microphone pin assignment
diagram in the Owners manual of your radio to determine which pin on the mic connector and thus
which pin on the P1 jumper block to jumper to RCV AUD.
See the section titled “RECEIVE AUDIO FROM YOUR RADIO (3 WAYS)” for the different methods
of getting audio from your radio to the computer Sound Card.
