51
West Mountain Radio
Operating Manual
battery may be operated, however readings will be incorrect if the probe is not in close contact with the battery
or there is air moving over it. Unlike an instant response IR thermometer, other types of thermometers take a
considerable amount of time to display their temperature reading. There is a noticeable thermal lag with our
thermistor type probe.
The CBA may be set for automatic over temperature cutoff. Place the probe on the battery. Go to
“Tools”, “Preferences” and check the check box next to “Stop test when battery reaches ? deg”. Fill in a
temperature appropriate for the battery (60 degrees C or less should be safe for most batteries).
WARNING: DO NOT continue a test if the “Temp:” indication reaches or exceeds the maximum
temperature specification for the battery being tested.
Support
If you cannot find the answer to a question about using the CBA here in this manual and help files, you may get
help several other ways.
Web Support:
http://www.westmountainradio.com/support
Email:
Phone: 262-522-6503 x32
Fax: 262-522-6504
Mail: West Mountain Radio
1020 Spring City Drive
Waukesha, WI 53186
For problems with the computer or USB port, contact the computer manufacturer.
For problems with the Windows operating system, contact the computer manufacturer if Windows came pre-
installed or Microsoft directly.
For problems with a battery or a product being used with it, contact that manufacturer or supplier.
Licensing
To purchase an Extended license follow the instructions on
West Mountain Radio
. License information will be sent
by email.
NOTE: This information is case sensitive.
After receiving the information start the program and connect the CBA that matches the License information.
Click on the connected icon at the bottom right, or go to “Tools > CBA Devices”.
