30
West Mountain Radio
Operating Manual
Command Line and Script Operation
This section explains how to configure your CBA software to run tests from a command line or scripting
language. If using multiple CBAs, first ensure that connecting to multiple CBAs is allowed while the program is
operating. If using a CBA IV, this capability is built in. If unsure, start the CBA software and select ‘Tools’ and
then ‘CBA Devices’.
Begin by plugging in the CBAs and if more than one shows up (similar to what is pictured above), please read
the help section
Multi CBA
.
Returning to the scripting language or command line, it is very important that all commands are carefully
reviewed before they are run.
NOTE: These command line parameters are for expert users. USE EXTREME CAUTION and please review
the
Safety
section of this help manual.
CBA Software Command-Line Options:
Items in italics are dynamic, value to be specified by user.
*This parameter should be given before other parameters:*
The following command-line options are required to use /test:
/cutoff
discharge
performs a Discharge Test with constant current draw from the battery.
