SAK Tillers
Page 7 of 23
IDENTIFICATION PLATES
The identification plates are placed on all the tillers and are structured as follows:
RECOMMENDED USE
The tillers described in this instruction and maintenance manual, have been designed explicitly to
till the land. Any other use jeopardizes the operator's safety and the machine integrity.
INAPPROPRIATE USE
The tillers shall not be used as follows:
Connected to vehicles which do not have a suitable power or weight.
Without being properly installed by securing the hitch blocks to all three points of the
tractor lift unit.
Tilling of extremely stony or unsuitable ground.
Raising or lifting of the equipment when the power take-off is engaged.
In close proximity to person/s when power is engaged.
Do not stand or step on the equipment when it is being operated or transported.
Do not operate the machinery while wearing unsuitable (loose fitting) clothing.
TORQUE SPECIFICATIONS
For correct hardware tightening on the tiller, we suggest the use of suitable torque wrench and
the applicable torque as listed in the table below:
M-THREADED SCREW/BOLTS
Bolt grade
Thread
8.8
10.9
Nm
Lb-ft
Nm
Lb-ft
M6
11
8.5
17
12
M8
28
20
40
30
M10
55
40
80
60
M12
95
70
140
105
M14
150
110
225
165
M16
240
175
305
225
M18
330
250
475
350
MODEL: 8833048
YEAR OF MANUFACTURE: 2007
WEIGHT: 286 lbs
SERIAL NUMBER: 0000000000001
Broadwood International
Trading Estate, Oakhanger Road, Bordon
Hampshire GU35 9HH
T: 01420 478111
F: 01420 483000
E:
