SAK Tillers
Page 15 of 23
FIRST CHECK
• After 50 working hours, change the oil in the gearbox and make sure that all the screws and
bolts are tightened.
EVERY 8 WORKING HOURS
•
Grease the rotor support through the grease nipple A (picture 7).
•
Grease the PTO shaft crosses.
EVERY 50 WORKING HOURS
•
Check the oil level in the gearbox (A - picture 8) and in the side transmission (A - picture 9). If
needed add SAE EP 80W90 oil.
•
Make sure that all the screws and bolts, especially on the blades, are tightened.
EVERY 500 WORKING HOURS
• Change the oil of the case/bevel gear pair, side transmission and rotor support; use SAE EP
80W90 oil. Contact the closest dealer for this maintenance activity.
The old oil must be disposed of in compliance with the local laws
where these activities are carried out; do not spill or dispose of
waste oil on the ground.
The maintenance of activities must be carried out with the engine off,
the power take off disengaged, the parking brake engaged, and the
equipment placed on the ground.
