Weslo Pursuit 93, User Manual

Page: 6 / 16

6
7
6. Hold the Console (16) near the Upright (13). Connect
the console wire to the Upper Wire (36). Next, connect
the ground wire to the Upright with the Ground Screw
(27).
Insert the excess console wire and Upper Wire (36)
down into the Upright (13). Next, move the Console
(16) toward the Upright, at the same time inserting the
excess ground wire up into the hole in the underside of
the Console. Continue until all of the excess ground
wire is inside of the Console. Attach the Console to the
Upright with four M5 x 12mm Screws (49).
Be careful
to avoid pinching the wires.
16
6
Be careful to
avoid pinching
the wires.
13
49
36
27
Ground
Wire
Console
Wire
5
5. The Console (16) requires three 1.5V AA batteries;
alkaline batteries are recommended. Insert three bat-
teries into the Console.
Make sure that the batteries
are oriented as shown by the markings inside the
Console.
16
Batteries
7. Attach the Seat (12) to the Seat Post (5) with three M8
Flat Washers (51) and three M8 Nylon Locknuts (10).
Note: The Flat Washers and Nylon Locknuts may be
preattached to the underside of the Seat.
51
12
51
10
10
5