17
ATTACHING AND REMOVING THE SEAT
Set the bracket on the Seat Frame (5) onto the indi-
cated pin on the Upright (3). Attach the Seat Frame to
the Upright with the M8 x 65mm Carriage Bolt (57)
and the Seat Knob (21).
For some exercises, the Seat (12) must be removed.
First, be sure that the Chain (not shown) is not
attached to the Leg Lever (8). Next, remove the Seat
Knob (21) and the M8 x 65mm Carriage Bolt (57)
from the Seat Frame (5). Lift the Seat Frame off the
Upright (3).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (8), the seat must be attached
to the upright (see ATTACHING AND REMOVING
THE SEAT, above).
Attach the Short Cable (48) to the bracket on the
back of the Leg Lever (8) with a Chain (36) and two
Cable Clips (35).
ATTACHING THE PREACHER PAD
To use the Preacher Pad (13) remove the indicated
38mm Square Inner Cap (53) from the Seat Frame
(5). Insert the Preacher Post (14) into the Seat Frame
and secure it with the Preacher Knob (15).
21
5
3
Pin
12
8
57
48
8
35
14
13
15
53
5
