10
15. Attach the Medium Cable (48) to the Small “U”-
Bracket (24) with an M8 Nylon Locknut (58) and
an M8 Washer (60).
See the inset drawing. Do
not overtighten the Nylon Locknut; it should
be threaded onto the end of the Cable only
two turns.
Attach the Small “U”-Bracket (24) to the Weight
Tube (26) with an M8 x 42mm Bolt (79) and an
M8 Nylon Locknut (58).
Do not overtighten the
Nylon Locknut; the “U”-Bracket must be able
to pivot on the Weight Tube.
16.
Locate the Short Cable (90). Wrap the Cable
around a 90mm Pulley (44). Attach the Pulley and
two Pulley Covers (43) to the bracket on the back
of the Upright (3) with an M10 x 52mm Bolt (65)
and an M10 Nylon Locknut (68).
Be sure the
large tabs on the Pulley Covers are on the
side shown, and that the Cable is between the
Pulley and the rod on the side of the Upright.
17. Wrap the Short Cable (90) around a 90mm Pulley
(44). Attach the Pulley and two Pulley Covers (43)
to the upper set of holes in the Long “U”-Bracket
(23) with an M10 x 52mm Bolt (65) and an M10
Nylon Locknut (68).
Be sure the small tabs on
the Pulley Covers are on the side shown.
15
16
17
79
24
58
44
43
43
68
3
65
Large
Tabs
90
Small
Tabs
65
90
43
43
44
23
68
48
48
24
26
58
60
14. Wrap the Medium Cable (48) around a 90mm
Pulley (44). Attach the Pulley to the bracket on
the Top Frame (4) with an M10 x 45mm Bolt (82)
and an M10 Nylon Locknut (68).
14
68
4
44
82
48
