Wenzel HT 400, User Manual, Page: 20 / 30

Control Panel - User Manual
5 - Basic functions of the control panel
Page 20 of 30 Revision: D Doc.no.: UM-22031


This is how to change the alignment (taking an LH measuring
machine as an example):

Stand with the HT 400 (RC) control panel at the location, from where you
wish to operate the 3-axis coordinate measuring machine.

Find "your" location in Picture 5
Picture 5 – Alignment of the control panel


This is how to traverse the axes with the control panel:

Keep pressing “Change the alignment” key until the “alignment
display” agrees with “your” position in the diagram.

Check if the axial control is switched on, switch on if necessary.

Activate X- and Y-axes.

Check if the measuring probe moves in the X- or Y-direction, in which
the joystick is deflected.
 
If the joystick and measuring probe movement agree, then the control panel
alignment has been optimised.