18
EN
6.13. Password
Password protection prevents against changing the set data unintentionally.
Password
Set password functionality
Activate
Change
Block
3
Back
7
Run
Enable:
Turn password protection on or off. If password protection is acti-
vated, the operation of the Sensor is disabled after supply power
has been interrupted and is only enabled after successfully entering
password.
Change:
Change password.
Lock:
Locking Sensor causes an immediate disabling of operation if activate
Password is set to “on”.
If the password functionality is activated, the password must be entered before each operation of the Sensor.
After correctly entering the password by means of the “+” and “–” button, the menu is activated and the Sen-
sor is operational.
• The password functionality is deactivated in the default settings.
• The value range of the password number ranges from 0000…9999
It is necessary to note the newly defined code before changing the password. A forgotten password can
only be overwritten by a general password. The general password can be requested by sending an e-mail to
.
Summary of Contents for OCP P0150C Series
Page 23: ...23...
