![background image](http://html.mh-extra.com/html/wen/71707/71707_manual_956564011.webp)
INSTALLING THE TILE CUTTING WHEEL (Figs. 3, 4 & 5)
1. Unplug the saw, flip up and remove the bevel table (Fig. 3).
2. Remove the arbor nut (Fig. 4 - 1) and outer flange (Fig. 4 - 2), leaving the inner flange (Fig. 4 - 4) on the arbor.
3. Install the cutting wheel (Fig. 4 - 3) against the inner flange, with the arrow on wheel going in the counterclockwise
direction.
4. Reinstall the outer flange (Fig. 4 - 2). Replace the arbor nut (Fig. 4 - 1) on the arbor. Using the two wrenches in-
cluded, tighten arbor nut securely (Fig. 5).
WARNING:
Use only cutting wheels that are suitable for your tile saw. Do not use wheels with a speed
rating less than 3450 RPM. Make sure the edge of the blade is smooth and free of openings or grooves.
Replacement cutting wheels
(Part No. 71707B)
can be purchased from wenproducts.com.
9
ASSEMBLY INSTRUCTIONS
▲
INSTALLING THE TILE CUTTING WHEEL
1. Unplug the saw and remove the bevel table.
2. Remove the arbor nut and outer flange leaving the inner flange on the arbor.
3. Fix the cutting wheel snug against the inner flange with the arrows on wheel going in the counterclockwise
direction.
4. Replace the outer flange. The “D” flat on the outer flange aligns with the flats on the arbor.
5. Replace the arbor nut on the arbor. Using the two wrenches, tighten arbor nut securely.
▲
INSTALLING THE SPLASH HOOD
1. Slide the splash hood bracket into the lip under the table behind the cutting wheel. Align the two slot of
splash hood bracket with the two flat head screw.
2. Align the hood bracket with the cutting wheel so that it does not interfere with the material being cut. Tighten
the two flat head screw.
3. Slide the splash hood over the bracket and align the holes in splash hood with the slot in the splash hood
bracket.
4. Insert the hex bolt through hood and bracket. Thread the knob onto the bolt and tighten to the desired
height. Always adjust the splash hood horizontally to the table and slightly above tile thickness.
9
ASSEMBLY INSTRUCTIONS
▲
INSTALLING THE TILE CUTTING WHEEL
1. Unplug the saw and remove the bevel table.
2. Remove the arbor nut and outer flange leaving the inner flange on the arbor.
3. Fix the cutting wheel snug against the inner flange with the arrows on wheel going in the counterclockwise
direction.
4. Replace the outer flange. The “D” flat on the outer flange aligns with the flats on the arbor.
5. Replace the arbor nut on the arbor. Using the two wrenches, tighten arbor nut securely.
▲
INSTALLING THE SPLASH HOOD
1. Slide the splash hood bracket into the lip under the table behind the cutting wheel. Align the two slot of
splash hood bracket with the two flat head screw.
2. Align the hood bracket with the cutting wheel so that it does not interfere with the material being cut. Tighten
the two flat head screw.
3. Slide the splash hood over the bracket and align the holes in splash hood with the slot in the splash hood
bracket.
4. Insert the hex bolt through hood and bracket. Thread the knob onto the bolt and tighten to the desired
height. Always adjust the splash hood horizontally to the table and slightly above tile thickness.
WARNING:
To prevent serious injury from accidental operation, make sure the power cord is discon-
nected from the power source and the tool is turned OFF before assembly or making any adjustments.
ASSEMBLY
Fig. 3
Fig. 5
Fig. 4
1
2
3
4
11
Summary of Contents for 71707
Page 22: ...EXPLODED VIEW PARTS LIST 22 ...
Page 24: ...THANKS FOR REMEMBERING ...