WARNING:
Remove the plug from the socket before carrying out any adjustments, service or mainte-
nance.
1. NEVER use water or other liquids to clean the electrical portions of the tool.
2. ALWAYS clean the tool and bits after use.
3. ENSURE that the ventilation slots are not blocked to prevent overheating.
4. REMOVE AND DISPOSE of damaged attachments.
5. CHECK that the locking collar is correctly aligned before use.
MAINTENANCE
OPERATION
WARNING:
Read and thoroughly understand all instructions and safety information before operat-
ing this rotary tool. Failure to do so may cause serious injury or death.
As with all power equipment, a rotary tool can be dangerous if it is not assembled or used properly. Do not operate
this power tool if you have doubts or questions regarding operation safety. Call our customer service department at
1-800-232-1195 M-F 8-5 CST to address your questions or concerns.
WARNING:
Always wear safety glasses, safety gloves, safety shoes and suitable work clothing when op-
erating this rotary tool. Do not wear jewelry, neckties or other loose clothing which could get caught in
moving parts.
WARNING:
Do not start or operate this machine in the presence of flammable liquids or gases.
1. Always wear safety glasses, safety gloves, safety shoes and suitable work clothing when operating this rotary tool.
Do not wear jewelry, neckties or other loose clothing which could get caught in moving parts.
2. Inspect the tool for any damage before use. Immediately discard any accessories with bent shafts or other signifi-
cant damage.
3. Be certain that the ventilation slots are not obstructed; failure to keep them clear may cause the tool to overheat.
4. Do not exert excessive pressure on your tool as it may damage your workpiece and the tool bit.
4. For milling and engraving operations, holding the rotary tool like a pen will yield better control. For heavier work
like drilling, holding the tool like a hammer will yield better results.
5. Use the correct rotary bits for the job, and use the included dressing stone to sharpen or shape any attachments
dulled by repeated use.
11
6.
IMPORTANT:
Servicing of the tool requires extreme care and knowledge and should be performed only by a
qualified service technician.
