SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
44
3.
-priority
: set codecs priority in order. Please notice that user can set from 1 to 5
codecs as their need, for example,
voice –priority g723
or
voice –priority g723
711a g711u g729 g729a
means SIP-Phone can support only one codec or four
codecs.
4.
-volume
: There are three types can be adjustable, voice volume, input gain and
DTMF volume. Voice volume means the volume user can hear, input gain means
the volume the other side can hear from SIP-Phone, DTMF means DTMF
transmitting volume. (
voice –volume voice “value of volume”, voice –volume
input “value of volume”, voice –volume dfmt “value of volume”
)
Note:
If value of volume set as 0 means –32db, 1 means –31db…etc.
5.
-nscng
: enable or disable sound compression and comfort noise generation. It is
only for codec G.723.1. (0 for off, 1 for on)
6.
-echo:
enable or disable echo cancellation function .
7.
-mindelay:
set minimum delay of jitter buffer(0~150)
8.
-maxdealy:
set maximum delay of jitter buffer(0~150)
Note: It is for advanced administrator use only. Please ask your distributor
before changing any settings of this command.
Summary of Contents for SIP-Phone 302
Page 1: ......
