WELLTECH SIP-Phone 302, User Manual

Page: 7 / 52

SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
6
♦
MUTE :
1. Mute the voice of Microphone and let others can’t hear from user in communication.
2. Change input mode to be digit or character mode: When configuration in LCD menu
can change input mode to be input digit only or input character.
♦
▲▼
: Move to up/down, left/right ; increase/decrease value.
♦
OK : Press OK to confirm the modification.
♦
Flash :
1. Transfer a call. User A can press FLASH button when in communication with user B,
then input phone number can make call to User C, after talk with C, A can hang up,
User B and User C can communicate.
2. Back to upper level of menu: when in LCD Menu, press FLASH button can jump to
upper level of menu.
♦
REDIAL / HOLD :
1. Redial the last outgoing call or hold one call in communication.
2. Upper-case/Lower-case character: change input character mode to be upper-case
or lower-case.
♦
SPEAKER : Speaking without picking up handset.
♦
5 Graphic Memory key : User press these keys to do speed dial according to phone
book data 1-5 (please refer to LCD configuration-Phone Book, Configuring the
SIP-Phone 302 through Telnet command lines - [pbook] command, or Web
Configuration-Phone Book chapter).
♦
Number 1 –10, * and # : The function is as the same as the general phone set.
Corresponding list of keypad and symbol:
1 “1”
2 “a” ; “ b” ; “c” ; “2”
3 “d” ; “e” ; “f” ; “3”
4 “g” ; “h” ; “i” ; “4”
5 “j” ; “k” ; “l” ; “5”
6 “m” ; “n” ; “o” ; “6”
7 “p” ; “q” ; “r” ; “s” ; “7”
8 “t” ; “u” ; “v” ; “8”
9 “w” ; “x” ; “y” ; “z” ; “9”
* “.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “’” ; “+” ; “$” ; “*”
0 “Space” ; “0”
# “#”