SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
41
11. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the SIP-Phone 302.
Note:
1. After user upgrade new software version, suggested to execute this command
to make sure new software work well on SIP-Phone 302.
2. To execute the command
flash –clean,
all configuration of SIP-Phone 302
stored in flash will be cleaned. It is authorized for the user whose login name is
“root” only.
12. [sysconf] command
1.
-print:
display all current configurations.
2.
-idtime:
set the duration(in second) of two pressed digits in dial mode as timed out.
If after the duration user hasn’t pressed next number, SIP-Phone will dial out all
number pressed.
3.
-keypad:
set DTMF type .User can select DTMF type SIP-Phone receive and
transmit.(
sysconf –keypad 0/1 ,
0 for in band ,1 for RFC2833.)
4.
-2833type:
change RFC2833 Payload type.
5.
-eod
: select end of dialing key, e.g. set end of dial key as “
＊
” button , after finished
pressing dialing number then press “
＊
” will dial out. (
sysconf –eod 0/1/2
, 0 for no
end of dial key , 1 for “
＊
” button, 2 for “
#
” button )
Summary of Contents for SIP-Phone 302
Page 1: ......
