SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
51
3. Telnet command lines
Please refer to chapter
4.17 [rom] command
1. -print
: show all current configurations and version information.
2. -app
,
-boot
,
-dsptest
,
-dspcore
,
-dspapp
,: upgrade main boot code, main
application code, DSP testing code, DSP kernel code, DSP application code, Ring
Back Tone PCM file and Hold Tone .
Note:
After upgrade Application, please remember to execute flash –clean command,
which will clean all configurations become factory values except IP address.
3. -boot2m
: to upgrade 2mb rom file, which includes all firmware file mentioned in
item 2.
4. -s
: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware
rom file.
5. -f
: the file name prepared for upgrading is necessary as well.
6. –method
: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)
7. –ftp
: specify user name and password for FTP download method.
For example: User prepares to upgrade the latest app rom file – lpsip.100, the TFTP
server is 192.168.1.1, User has to input command as below:
rom –app –s 192.168.1.1 –f lpsip.100
Summary of Contents for SIP-Phone 302
Page 1: ......
