SIP-Phone 302 Administration Guide
SIP-Phone 302 Ver:
36
Chapter 4 Configuring the SIP-Phone 302 through Telnet
command lines
After setting the IP Address of SIP-Phone 302 and reboot, (please refer to LCD Menu:
5-3.4.5), user can enter into Telnet command lines.
Note:
1. After user enter SIP-Phone configuration via telnet, please use login: ”
root
”,
password: null, press enter to enter command lines.
2. User must input lower-case command, but contents of configurations such as SIP
alias or user name etc, user can set as capital case.
3. After any change of configuration, please remember to do
commit
command to
save changes and then
reboot
command to reboot system.
1. [help] command
Type
help
or
man
or
?
to display all the command lists. The following figure is shown
all commands of SIP-Phone 302.
Summary of Contents for SIP-Phone 302
Page 1: ......
