![background image](http://html1.mh-extra.com/html/welltech/epbx40/epbx40_user-manual_955976013.webp)
Welltech Technology Co., Ltd.
13
2.1.1
Network Configuration
To change your Network Setting, click
Network
, and then click the
Network Setting
table. The screen appears as follows.
Figure 2.1.1 Network Setting
The following table describes the features in this screen.
Table 2.1.1 Network Setting
Label
Description
WAN Port Setting:
Mode
Select ePBX40 WAN port network mode to be
Fixed IP, DHCP
or PPPoE.
Note: If you want other extensions IP devices from Internet to
register to ePBX40 via WAN port, you have to select Fixed IP
mode and give a static and physical IP address.
IP Address
Enter the IP Address, If ePBX40 was set to fixed IP mode.
Subnet Mask
Enter the Subnet Mask Address, If ePBX40 was set to fixed IP
mode.
Default Gateway
Enter the Default Gateway Address, If ePBX40 was set to fixed
IP mode.
Primary DNS
Enter the IP address for Primary DNS.
The default is
168.95.1.1.
Secondary DNS
Enter the IP address for Secondary DNS. The default is null.
Default Gateway
Backup
Select Enable option, if there are any connection problem
occurred on primary default gateway connections, all the traffic