![background image](http://html1.mh-extra.com/html/welltech/epbx40/epbx40_user-manual_955976021.webp)
Welltech Technology Co., Ltd.
21
SIP Trunk Configuration
When
external FXO devices
were installed at either local LAN or remote locations as well
as IP Trunk, for instance, WellGate 2540 or 2680 (or connect to other SIP Server or IP-PBX
via external IP network), the
SIP Trunk
field has to configure properly. To change SIP
Trunk configuration, click
Configuration
, and click the
SIP
Trunk
table as well. The
screen appears as follows.
Figure 2.1.3-1 SIP Trunk
The following table describes the features at above screen.
Table 2.1.3-1 SIP Trunk
Label
Description
Select
Select this check box and modify or delete it.
Trunk Number
This field shows the Trunk Number information which register
at ePBX40.
Comment
This field shows the remark information.
NAT Traversal
This field shows the NAT Traversal information if this device was
installed behind router.
Dial Plan
This field shows the Dial Plan information when either
IP Trunk
or External FXO Gateway
has incoming call to extensions of
ePBX40.
Maximum Channels
This field shows the Maximum concurrent call to this trunk. For
example, the concurrent call from ePBX40 to external SIP
Server or IP-PBX.
There is no limitation if this field left blank.
Add
Click on the Add button to display a new Trunk Setting screen.
Modify
A Trunk can be modified by clicking on the checkbox next to the
Trunk and click on the Modify button to modify its contents.
Delete
A Trunk record can be deleted by clicking on the checkbox next
to that Trunk and click on the Delete button.
Total Count
This field shows Total Counts of trunk information.
Number Search
Enter the search number, then click enter key. The screen will
display matched search data.
Total Page
This field shows Total Pages of trunk information.
Page
This field shows Page Number information. You can Enter page
number, then click enter key. The screen will display this page
data.
Next/Prev
Click on the Next/Prev to Next/Previous Page. The system will
auto display the Next or Previous trunk Information.