Welltech Technology Co., Ltd.
33
Step 6:
If you have exported disconnect tone file to your computer successfully, make sure
to clear PSTN Line number at
Disconnect Tone Recording Procedures
General
Setting
PSTN Line No
and configure your desire voice codec such as G.729 at
Configuration
IP PBX
to set up voice codec priority at
G.711U
when ePBX40 go back
to normal operation mode. Click
Apply and Soft Reset
to take effect of your setting. See
the following webpage.
Step 7
: Use third party program to analyze recorded disconnect tone. The procedures
were described at another chapter at this user guide.
Table
3.1.3-1 Disconnect tone Recording Commands
Label
Description
Export
Export recorded disconnect tone file to your computer. It is a
ZIP compressed file. Please unzip it for analysis.
PSTN Line No
Enter a busy Phone number which was connected at PSTN
network.
Line ID for analysis
To select a FXO Line ID (FXO Line port from 1 to 4) to use.
Apply
Click the Apply button to save your settings and exit this
screen.
Cancel
Click the Cancel button to give up change.
