![background image](http://html1.mh-extra.com/html/welltech/epbx40/epbx40_user-manual_955976031.webp)
Welltech Technology Co., Ltd.
31
country’s PSTN has not the second ON/OFF time, please set up
to 0.
Off 2 (0-10230ms)
Some tone may provide the second cycle of tone cadence. This
field support OFF time of the second cadence tone.
If your
country’s PSTN has not the second ON/OFF time, please set up
to 0.
Deviation(ON/OFF
time)
The tolerance of cadence ON/OFF time.
Dial
(FXS Only)
This row is to configure Dial tone frequency and cadence time.
Call Waiting
(FXS
Only)
This row is to configure Call Waiting tone frequency and
cadence time.
Ring Back
(FXS Only)
This row is to configure Ring Back tone frequency and cadence
time.
Disconnect 1
(FXO
only)
There are two sets of disconnect tone to configure.
The first set
of disconnect tone. To configure disconnect tone for FXO port to
detect in order to release FXO port after call was dropped.
Disconnect 2
(FXO
only)
There are two sets of disconnect tone to configure. The second
set of disconnect tone. To configure disconnect tone for FXO
port to detect in order to release FXO port after call was
dropped.
Stutter Dial
(FXS
Only)
Call Waiting message light for analog phone set only.
Busy
(FXS only)
This row is to configure Busy tone frequency and cadence time.
Apply
Click on the Apply button to save your customized settings and
exit this screen.
Cancel
Click on the Cancel button to give up change.
3.1.3
Disconnect Tone Recording
This section is going to illustrate how to record disconnect tone which was generated from
local PSTN to inform FXO Line to release FXO port. The recorded tone file was stored at
RAM inside ePBX40.
Please export this tone file after recording. Once ePBX40 was reset or
City power was fail, this tone file will be lost.
The procedures to record disconnect tone, please see the following Webpage description
at Figure 3.1.3-1.
After exporting disconnect tone file, there is one voice frequency analysis software to tell