background image

M212  p/n 2M-Z17213  OpM  WB1C & WB2C- W

affle Baker

PRECAUTIONS AND GENERAL INFORMATION

3

DANGER: BURN HAZARD

Contact with cooking grid surface will cause severe burns. Use the handle to lift 

the grid. Avoid contact with grid surfaces.

WARNING: ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by 

qualified service personnel. DO NOT open any access panel that requires the use 

of tools. Failure to heed this warning may result in severe electric shock.

This appliance is intended for use in commercial establishments only.
This appliance is intended to prepare food for human consumption.  No 

other use is recommended or authorized by the manufacturer or its 

agents.
Operators of this appliance must be familiar with the appliance use, 

limitations and associated restrictions. Operating instructions must be 

read and understood by all persons using or installing this appliance.
Cleanliness of this appliance is essential to good sanitation. Read and 

follow all included cleaning instructions and schedules to ensure the 

safety of the food product.
Disconnect this appliance from electrical power before performing any 

maintenance or servicing.
DO NOT submerge this appliance in water. This appliance is not jet 

stream approved. Do not direct water jet or steam jet at this appliance, or 

at any control panel or wiring. Do not splash or pour water on, in or over 

any controls, control panel or wiring.
Exposed surfaces of this appliance can be hot to the touch and may 

cause burns.
The technical content of this manual, including any wiring diagrams, 

schematics, parts breakdown illustrations and/or adjustment procedures, 

is intended for use by qualified technical personnel. Any procedure which 

requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. 

This manual and all supplied instructions, diagrams, schematics, 

parts breakdown illustrations, notices and labels must remain with the 

appliance if it is sold or moved to another location.
This appliance is made in the USA. Unless otherwise noted, this 

appliance has American sizes on all hardware.

This appliance conforms to NSF Standard 4 for sanitation only if installed 

in accordance with the supplied Installation Instructions and maintained 

according to the instructions in this manual.
This appliance is 

U

 Listed under UL File E6070 for 120V.

AGENCY LISTING INFORMATION

STD 4

E6070

CAUTION: RISK 

OF DAMAGE

DO NOT connect or energize 

this appliance until all 

installation instructions are read 

and followed. Damage to the 

appliance will result if these 

instructions are not followed.

CAUTION: HOT 

SURFACE

Exposed surfaces can be hot to 

the touch and may cause burns.

®

C

US

LISTED

Summary of Contents for WB1C Series





















Reviews: