background image

CUSTOMER SERVICE DATA

please have this information available if calling for service

RESTAURANT _____________________________  LOCATION  _______________
INSTALLATION DATE ________________________ TECHNICIAN _____________
SERVICE COMPANY __________________________________________________

ADDRESS ___________________________ STATE ______ ZIP__________
TELEPHONE NUMBER (_____)_____-_________

EQUIPMENT MODEL NO. ______________________________________________
EQUIPMENT SERIAL NO. ______________________________________________

FUEL: (check one)

NATURAL GAS

LP

        PROPANE

15

PARTS & SERVICE

IMPORTANT:  Use only factory authorized service parts and replacement filters.

For factory authorized service, or to order factory authorized replacement parts, contact your
WELLS AUTHORIZED SERVICE AGENCY, or call:

Wells Manufacturing Company
2 Erik Circle, P. O. Box 280
Verdi, NV  89439
phone:  (775) 345-0444 ask for:

Customer Service

fax :

(800) 356-5142

Service Parts Department

fax:

(888) 492-2783

Service Parts Department can supply you with the name / telephone number of the WELLS
AUTHORIZED SERVICE AGENCY nearest you.

ACCESSORIES

PART#

LEGS, 4”, METAL,  SET OF 4

20563

SCRAPER, GROOVED GRIDDLE

20651

Summary of Contents for GAS GRIDDLES



















Reviews: