Wells GAS GRIDDLES, Operation Manual

Page: 3 / 18

TABLE OF CONTENTS
1
SHIPPING DAMAGE CLAIM PROCEDURE
NOTE: For your protection, please note that equipment in this shipment was carefully inspected
and packaged by skilled personnel before leaving the factory. Upon acceptance of this shipment,
the transportation company assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on
the freight bill or express receipt, and that the note of loss or damage is signed by the
delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is
unpacked, notify the transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This should be done within fifteen(15) days
from the date the delivery was made to you. Be sure to retain the container for inspection.
Wells Manufacturing cannot assume liability for damage or loss incurred in transit. We will,
however, at your request, supply you with the necessary documents to support your claim.
Warranty Inside Cover
Specifications 1
Features and Operating Controls 2
Safety Procedures 3
Warmer Precautions & General Information 3
Installation Instructions 4
Griddle Start-Up Instructions 7
Testing & Calibration Instructions 8
Operation 9
Preventative Maintenance
Griddle Cleaning Instructions 11
Parts & Service 15
SPECIFICATIONS
Incoming Gas Pressure Natural Gas 5.0 inch water column
LP / Propane 10.0 inch water column
Gas Consumption 25,000 BTU / hour / burner
EQUIPMENT BURNERS THERMOSTATS TOTAL BTU
WG-2424G 2 2 50,000 BTU / hour
WG-2436G 3 3 75,000 BTU / hour
WG-3036G 3 3 75,000 BTU / hour
WG-2448G 4 4 100,000 BTU / hour
WG-3048G 4 4 100,000 BTU / hour