Wellav CMP201 User Manual Download

Page: 61 / 131

CMP201D User Guide

it is triggered by external IP or analogue signal, the services(s) will be switched to the AV or ASI
service from EAS module.



Service:

There are 2 programs corresponding to 2 HDMI/Component ports



Status:

Paved/Unpaved



EAS Override:

Tick the check-box to select the program(s) needing to be paved.

Click the

Apply

button on the right side to make the change take effect.

CE2-HDMI-02C> System

Please refer to CR2-DVBC/DTMB module.

5.2.4 CE2-SDI-00

CE2-SDI-00 module supports 2CH H.264/AVC HD/SD (up to 1080p60) or MPEG-2 HD/SD (up to
1080i60) encoding via SDI/CVBS input. MPEG1-L2, AAC and AC3 audio encoding are available with
optional licenses (2

BNC, 2

6-pins interfaces (for analog audio inputs)).

Summary of Contents for CMP201




































































































































Search results

Summary of Contents for CMP201

Reviews:

Related manuals for CMP201

Brands by name

Popular brands

Wellav CMP201, User Manual

Search results

Summary of Contents for CMP201

Reviews:

Related manuals for CMP201

Brands by name

Popular brands