CMP201D User Guide
122
Here you can select all modules or click checkbox of the module option which you need to make EIT
enabled configuration. EIT function is enabled by default on modulator module and disabled on all IP
output channels of baseboard. You can check the detailed information in the Tips tab.
Supports parsing of EIT table with DVB-S/S2/S2X/C/T/T2, ISDB-T, IP input.
Supports QAM-A/OFDM/IP output EIT table.
Click
Apply
button on the right side to make the changes made take effect.
When there is a CP2-EIT-00 module, you should still start the configuration from receiving modules
and output the required services to modulation module or IP output of baseboard, since the EIT
module will utilize the created service list to generate a new EIT table accordingly. Here is an
example of CR2-DVBS2CI-00 DVB-S/S2 receiver module and CM2-QAMA-R01A modulation
module as an example.
Select the corresponding modulation module and a channel for each service. The service will be
multiplexed automatically on the modulation module.
