11
Radio Frequency Wireless technology 2.4G
is used in this system, for good quality of service between the remote and
wireless unit(s) requirement requires 3 meters (9 feet).
1. LCD symbol on the remote control and LED indicator guide on wireless unit(s):
Indicator Description
LCD symbol on Remote
1. It shows Mode, Timer, Intensity Level, and wireless unit by Channel
number on the LCD display when Power ON, LED backlight for 10
seconds.
2. If the paired wireless is connected, it will display :
or
3. If low battery symbol shows
, battery power is low.
When charging the remote , the device will shut off automatically.
Receivers ( Ch1 / Ch2) :
1. When Power ON, Green LED light on.
2. LED in Green blinking on the Channel in use, when it receives signal
transmitting from the Remote Control.
3. LED in Red Flashing, battery power is low.
Receiver unit will turn on when charging the battery,
Orange
light lasting until fully charged, then it turns off.
2. There is one (1) Remote with two (2) receivers (Ch1 or Ch2 printed on the front) supplied for use with this system.
Additional two (2) receivers (Ch3,Ch4) might be available for replacement purpose, please contact authorized
distributors.
3. Whenever the receivers turns on, the remote control unit shall display the identical number of receiver(s) .
Make sure the identical receiver is turned on and properly placed before setting up Program /Timer / Intensity Level.
4. The Remote will display treatment status on the LCD sequentially in turn to the Channel of receiver(s). Or,
you could turn off the remote when all set.
Selecting the Program
