17
TROUBLE SHOOTING
Always check the unit and accessories before use to prevent damage and defects; these are some of
the simple checks:
1. Make sure the Remote and Receiver(s) have a sufficient charged.
2. Make sure the Remote and Receiver(s) turn on and in 3 meters (9 feet) away from each other, for
good quality of receiving distance …
If this happens …
Try this solution…
The Remote is not turning on or
I cannot see anything on the screen
Ensure that the remote has been fully charged.
The power light on the Receiver(s)
flashes continuously.
Charge the Receiver(s) or it will turn off automatically.
The Remote and/or Receiver(s) do not
seem to be charging.
Ensure the USB Cable is correctly into the Remote/
Receiver(s) and firmly plugged into the AC adaptor and
into the electrical socket on the other side.
Receiver(s) does not pair with remote
The remote does not control Receiver(s)
well
●
Make sure the receiver is fully charged, and turned
on, away from Remote in 3 meter distance.
●
Try to restart the remote and receiver(s).
Stimulation causes discomfort
●
Electrodes lose their adhesive capacity and no
longer provide adequate contact with skin.
●
Electrodes are worn and must be replaced.
●
Change the positing of the electrodes slightly.
●
Choose Program that is appropriate to your needs
or gives you the greatest pleasure.
Stimulation does not produce the usual
sensation
●
Check that all settings are right and check
electrodes are properly positioned.
●
Change the positing of the electrodes slightly.
