Welkin WKEM002, User Manual

Page: 11 / 22

11
Guidelines for Using Gears
To get the best performance and service life from the gear change system, understand and
apply the following techniques:
• You MUST be pedaling during gear changes.
• Do not attempt to change multiple gears in a single action.Allow each gear change to
complete fully before the next change.
• Always use an appropriate gear for your speed, the terrain and incline. This helps you ride
most efficiently.
• Keep the chain and gears properly lubricated and clean.
• If you notice noise after changing gear or an ability to select a gear or the chain not running
smoothly,have the gear system inspected and adjusted by a b1ic2ycle mechanic or suitably
qualified person.
Using Brakes
All bicycle models are equipped with a front and rear wheel braking system. Brakes are used
to slow the bicycle down. The braking systems may use different mechanics; however,the
functionality is the same, and that is to change the energy of the moving bicycle into heat
energy (“friction”): For disc brakes, this means pads made from a special friction material
pinching against a disc mounted to the centre of the bicycle wheel.
The brakes are operated by the rider through levers mounted to the handlebars,The left-hand
lever operates the rear brake,the right-hand lever operates the front brake. The ability of the
rider to adequately slow and/or stop the bicycle depends largely on the skill of the rider, the
surface being ridden on and other factors such as rain, tyres, adjustment and condition of the
brake parts etc.
Guidelines for Using Brakes
To get the best performance and service life from the brake system, understand and apply the
following techniques:
• In wet conditions, which reduces friction, always provide additional distance for braking and
adjust how quickly you apply the brakes.