Welkin WKEM002, User Manual

Page: 13 / 22

13
3. When the battery is charged (approximately 6 hours), the charger indicator LED illuminates
green. Disconnect the charger from the electrical supply, then disconnect it from the bicycle.
Lower the battery pack handle to protect the bicycle charging port.
Removing the Battery Pack
1. To remove the battery, insert the key into the keyhole in the ON position. Apply pressure to
push the key towards the battery pack so that the keyhole is depressed. While it’s depressed,
turn the key anti-clockwise towards the OFF position.
2. The battery pack is now unlocked and can be released from the bicycle.
Maintenance
Some maintenance activities described may be beyond the scope of some users. Do NOT
attempt procedures that you are not comfortable with, or do not have the necessary tools,
experience or knowledge for - take the unit to an authorized service centre or qualified
technician for servicing. Items in the maintenance schedule below that are recommended to
be performed by a qualified technician are highlighted yellow.
• Failure to follow the maintenance recommendations, using incorrect or non compatible
accessories or replacement parts, or general negligence may result in making the product
warranty void. Improper adjustment or service may result in damage to the bicycle or make it
hazardous.
• Maintenance requirements may be affected by any number of factors from your riding style
to geographic location.
• When new, parts of the bicycle may "break-in" over the course of the first approximate
100km of riding, possibly including the stretching of cables, spoke tension changes etc. It is
recommended to have the bicycle inspected and serviced at an authorized service centre or by
a qualified technician.
• The bicycle components are subject to wear and stress. If a component is weakened through
stress, age etc, it may fail without warning. It is important to regularly inspect the bicycle for
any signs of component fatigue - look for cracks, fraying, discoloration etc, as this may indicate
that a part is near the end of its useful life and should be replaced.
• Clean the bicycle with a soft, damp cloth - do NOT use high pressure water cleaners or