7
Pedals
It is critical that you follow the pedal to crank arm attachment procedure carefully to ensure
correct assembly. During assembly, do NOT use excessive force to screw the pedals into the
crank arms – this may indicate misalignment of the pedals or unmatched threads. If the pedal
does not "feel right" when being screwed in, STOP immediately and check that it is the correct
pedal and that it is aligned properly with the crank arm.
Failure to follow the instructions
here or take due care may damage the equipment and void any product warranty.
1.
Starting with the right-hand crank arm,identify the right-hand pedal assembly,which is
identified by having the pedal bolt stamped "R".
2.Very carefully begin screwing the pedal bolt into the crank arm (rotate right / clockwise). If
the bolt does not "feel right" when being screwed in, STOP immediately and check that it is
the correct bolt and that it is aligned properly with the crank arm. Screw the pedal bolt in
fully,then tighten to the specified torque using a 15mm spanner and torque wrench.
3.Repeat the above procedure for the left-hand crank arm,noting that the pedal bolt and
crank arm thread is left-hand(rotate left/anti-clockwise to tighten)and that the pedal bolt is
stamped “L”.
Operation
Before riding, ensure that all required fasteners are tightened to the correct torque.
• Charge the battery prior to use.
• Ensure that the pedal assistance system is switched OFF when the bicycle is not in use.
• Always wear a helmet and appropriate safety equipment and always keep both hands on
the handlebars and both feet on the pedals whilst riding. Read, understand and follow all
safety recommendations before riding.
• Avoid riding in damp conditions, rain etc. as this may affect operation or possibly damage
the bicycle electronics.
Summary of Contents for WKEM002
Page 22: ...22 WELKIN ...