45
4.1 Temperature setting
AFTER HAVING INSTALLED THE APPLIANCE WAIT 4 - 6
HOURS BEFORE YOU CONNECT IT TO THE MAINS.
(1)
Set the thermostat to position 3 (daily-use-temperature)
as soon as you have switched on the appliance. After 5
hours the appliance has reached its normal operating
temperature and is ready for operation.
(2)
If you desire a higher (warmer) temperature, set the
thermostat from position 3 to position 2 or lower.
(3)
If the ambient temperatures are high (e.g. hot summer-
days), set the thermostat to position 4 or higher to
decrease the temperature inside the appliance.
(4)
If you have set a lower (colder) setting, some ice may
occur on the back of the appliance. In such a case set the
thermostat to a higher (warmer) position.
(5)
The setting 0/OFF switches off the compressor only. You
must unplug the appliance to disconnect it from the
mains.
WARNING!
Never use mechanic devices, knives or other sharp-
edged items to remove encrusted ice inside the
appliance. RISK OF ELECTRIC SHOCK caused by
damaging the interior of the appliance.
4.2 Operation parameters
(1)
The appliance can only reach the relevant temperatures
when:
(a)
the ambient temperature meets the climatic class.
(b)
the doors close properly.
(c)
you do not open the doors too often or too long.
(d)
the door seals are in proper condition.
(e)
the appliance is properly positioned.
(f)
you have not overfilled the appliance.
(g)
you do not store warm or hot food in the appliance.
(2)
High ambient temperatures and simultaneously operating
at the coldest setting may make the compressor operate
permanently to keep the temperature constant inside the
appliance.
(3)
Defrost the appliance periodically as encrusted ice will
decrease the power and increase the energy consumption
of the appliance.
