Welch Allyn Connex CS Install Manual Download Page 84

Page: 84 / 133

Configuration Details

Configure auto discharge settings

The Welch Allyn ADT Task Scheduler Service provides a configurable service that runs
automatically in the background to assist in managing the Patient List contents and remove old
entries.

Note

The automatic discharge feature is only applied to patients that are not currently
being monitored on the Central Station.

1. From a Central Station, navigate to

Settings

Admin tools

Settings

menu, click on

Sever

2. From Connex Server, launch the

Admin Tools launcher

Admin tools

tab >

Settings

menu, click on

Sever

3. The server available settings window appears. An example is shown in

“Figure B-48:

Automatic discharge settings controls available in Server settings win

dow” below.

4. Select

Edit

to make changes.

Figure B-48: Automatic discharge settings controls available in Server settings window

Summary of Contents for Connex CS






































































































































Search results

Summary of Contents for Connex CS

Reviews:

Brands by name

Popular brands

Welch Allyn Connex CS, Install Manual

Search results

Summary of Contents for Connex CS

Reviews:

Brands by name

Popular brands