Welch Allyn Connex CS, Install Manual

Page: 22 / 133

16 Setup
Install the Warm Spare in the same manner as a Central Station. It requires power, a network
connection with link to the Connex server, keyboard, mouse, and a display (for administration).
Consult with the facility Biomedical Engineering team as needed to determine the location for
placing the Warm Spare station.
Refer to all instructions in
Setup
for these general steps.
Note A Warm Spare station is not required to be installed in the local area near a
Central Station. A Warm Spare station may be installed anywhere within the
facility that supports network connectivity to the Connex server.
Note If the Warm Spare station is not located on the same IP subnet as the station
being replaced, some network changes may be necessary. Refer to the
Connex
CS Server Install Guide for assistance in making changes to network settings on
the Warm Spare station if required.