Welch Allyn Connex CS, Install Manual

Page: 132 / 133

126 Configure Clinician Authentication
Figure F-11: Add a Custom active directory example
When changes are complete
1. Click on the Save button at the bottom of the working window.
2. Restart ECS for all changes to take effect.
Order the security providers
The admin tool provides the capability to reorder the security providers.
1. Check the Status box for each identifier to be used.
2. Click on the Provider Name to select, and use the Up and Down buttons to change its order
in the list.
Figure F-12: Manage order of security providers example
Note The order is important when multiple security providers are configured and
selected. The first successful authentication or lookup is used. The remaining
providers in the list are not queried.
Delete a security provider
If required, the Admin tool provides the capability to delete a security providers.
1. Identify the provider to be deleted.
2. Use the Delete
button available in the “
Select authentication providers
” section.
CAUTION
Do not delete the item associated with “ConnexDatabase”. This is the
default setting in software and should be left in place. If the facility will not be
using the ConnexDatabase,
uncheck the Status
in the “Select authentication
providers” area instead.