Welbilt Merrychef eikon e1s, Manual

Page: 78 / 148

78
eikon e1s
Service and repair guide
Stage 1: Clean and dry the oven and oven parts
1. In a cooled-down oven (see section
2G), open the door and remove the
cook plate and any other cooking
accessories. 2. Wash all removed oven parts in
warm soapy water. Wash off
using a clean cloth and plenty of
warm water.
3. Use a dry clean brush to remove
any food particles from between
the cavity floor and the inside of
the front door.
4. Spray Merrychef approved cleaner
onto a sponge and clean all internal
surfaces
except the cavity roof (jet
plate) and door seal .
Do not spray directly into the cavity.
5. For difficult areas, leave to soak
for 10 minutes with the
appliance door open. Use a non-
abrasive nylon scrub.
Do not scrub.
6. Wash off all surfaces using a wet
clean cloth. The cavity roof and
door seal can be wiped clean with
a wet clean cloth as well.
7. Dry all surfaces and oven parts using
a clean cloth or paper towel.
8. Press the checkmark on the
clean cavity screen to continue. 9. A prompt will appear to apply the
oven protector (optional).