117
eikon e1s
Service and repair guide
Live components
Risk of electric shock from live parts
When the covers of the microwave combination oven are removed, there is a risk of electric shock from touching live parts.
•
Make sure that any work on the electrical system is performed solely by a qualified electrician from an authorized
customer service office.
•
Before removing the covers:
o
Switch the appliance off and disconnect the plug from the wall socket.
o
Turn off the isolator switch to disconnect fixed wired appliances and lock-off.
o
Take protective measures at every power switch to ensure that the power cannot be switched on again.
o
Always discharge the high voltage capacitors before working on the appliance using a suitably insulated
10MΩ resistor.
o
Make sure that the appliance is de-energized.
•
Make sure that the electrical connections are intact and connected securely before you reconnect the appliance to
the power supply.
•
Before putting the appliance back into operation, make sure that the appliance, including all metallic accessories, is
connected to an equipotential bonding system.
When the appliance is not connected to an equipotential bonding system, there is a risk of electric shock from touching live
parts.
•
Make sure that any work on the electrical system is performed solely by a qualified electrician from an authorized
service company.
•
Make sure that the electrical connections are intact and connected securely before putting the appliance into use.
•
Before preparing the appliance for use, make sure that the appliance, including all metallic accessories, is
connected to an equipotential bonding system.
Microwave emissions
Risk of burns from microwave emissions
•
Do not become exposed to emissions from the microwave generator or parts conducting microwave energy.
•
Never operate an appliance that has failed the Microwave Leakage test.
Fire / smoke in the appliance
Risk of fire and/or smoke
Flames and/or smoke may come out of the oven when switching it on after service/repair. This can be caused by a defective
electrical component or electrical connections (wiring) that have been refitted incorrectly.
•
Switch off the oven.
•
Disconnect/isolate the oven from the electrical supply.
•
Keep the oven door closed to stifle any flames.
Summary of Contents for Merrychef eikon e1s
Page 11: ...11 eikon e1s Service and repair guide Section 1 Safety ...
Page 43: ...43 eikon e1s Service and repair guide Section 2 Operations and Installation ...
Page 82: ...82 eikon e1s Service and repair guide Section 3 Service and Repair ...
Page 147: ...147 eikon e1s Service and Repair Guide Circuit diagrams ...
