WEISS WAS.handling, Operating Instructions Manual

Page: 4 / 60

1
WAS.handling Windows – Program
1 Safety warnings
1.1 Explanation of symbols and notes
This manual contains instructions to be observed for the safety of people and the avoidance of damages.
These warnings are emphasized by icons and look – according to danger level – as follows:
Minor personal injury or material damage may occur if appropriate
precautionary measures are not taken.
Useful information.
1.2 Safety and utilization notes
Validity:
This is the software documentation for WEISS controls for Pick & Place HP140 with B&R ACOPOS Servo
Drives. It is complete only together with the mechanical and electrical documentation. Depending on the
interface to the supervisory control system, please observe the interface description.
Purpose of the instruction manual:
This manual helps with the safe operation of the control system. It contains safety warnings that must be
observed and information necessary for trouble-free operation. Keep this manual close to the device. Make
sure that all people working with or operating the device have access to this manual at all times.
Keep this manual for future reference and pass it on to every subsequent owner, operator, and customer.
Operation of the HP140 must not be started before the entire machine and control system – especially the
safety system – complies with Machinery Directive 98/37/EC!
Target group:
This manual is intended for people who are assigned to planning, installation, deployment, maintenance and
service and who possess the appropriate qualification, competence and knowledge.
Trained personnel are people with the appropriate qualification who are familiar with the work described
above and the operation of the product.
All tasks in other areas such as transportation, storage or disposal must be carried out by people who are
appropriately trained.
The HP140 can be fully operated using the Windows program. While operating
the program, make sure that there is nobody within the danger zone.