Shanghai Weishi Mechanical CO.LTD.
1
3
Figure
（
X
）
Custom graphics edit interface
Button/Display
Content
No.of edit graphics
Select the No.of edit graphics.If the edit existing
number,
pls pay attention to the new file will recover the
old one.
line No. of the current
pattern edit settings
Select the No.of edit line.If the edit existing number,
pls
pay attention to the new file will recover the old one.
Strengthing needles
Setting the number of strengthing needles of the current
processing file.
X, Y axis jog control
and jog speed setting
On X, Y axis after jog speed setting, the mould can be
taught, for acquiring and processing the graphics
coordinate point, thereby generating graphics processing.
Select the type of
straight line segments
Edit the current line type selection the key is a straight line,
starting from the need to set the edit window segment, and
end coordinates of the line segment, terminal velocity
setting.
Arc segment type
selection
The current segment type editor, select the button when the
arc is required to set the starting point in the editing
window of the arc, and the arc from the end point
coordinates, end speed setting.
Tacking connection type
selection
When the connection type human word for external lines
connected to tacking sewing.
line connection type
selection
Connection type is expressed inside and outside the word
line connected to a line of sewing.
Jump Connection type
Connection type is digital, said inside and outside the wire
in an intermittent (Jump Connection) fashion sewing.
