5.4 Electrical connection
DANGER
Risk of electric shock
Working on the unit when voltage is applied can lead to electric shock.
▶
Isolate the unit from the power supply prior to starting any work.
▶
Safeguard against accidental re-start.
The electrical connection must only be carried out by qualified electricians. Observe
local regulations.
CAUTION
Damage due to incorrect wiring
Hot compressors or pipework can damage electrical wiring.
▶
Secure wiring in such a way that it does not come into contact with hot compo-
nents.
▶
Remove side panel.
Screened cables required.
▶
Run power cables through recesses.
▶
Fit the interference filter (ferrite core) enclosed to the power supply cable and
secure with cable ties.
▶
Connect wiring as shown in the wiring diagram.
▶
Secure wiring with cable ties
1
to bracket.
▶
If mounting the external sensor outside the unit, re-connect the sensor wiring to
the luster terminal.
Installation and operating instruction
Outdoor unit WWP L 15 ARS
5 Installation
83292002 • 1/2014-05 • La
34-55
