24 | EN
Notes on troubleshooting
Fault
Cause
Remedy
Drive does not run,
1. The battery is empty.
1. Insert new
Transmission
Battery.
indicator lamp does
2. The battery is
2. Insert battery
not light up.
incorrectly inserted.
correctly.
Drive does not run,
1. Receiver outside
1. Recuce distance
Transmission
sending range.
to the receiver.
indicator lamp
2. Transmitter is not pro- 2. Program the
stays on.
grammed into receiver. transmitter.
The automac
The BiEasy 1MW-3V
Switch the
commands are
is set on
BiEasy 1MW-3V
not executed.
„MANUAL“ mode
into
(red).
„AUTO“ mode.
Drive operates in the Incorrect direction
Delete transmitter
wrong direction.
has been programmed.
and program correctly.
Notes on troubleshooting
EN | 25
Notes on repair/repair address
Notes on repair
Please contact us, if you are unable to eliminate a problem.
When contacting our service team, please always state the item
description and number from the type plate (back of device).
– Item number
– Circumstances
– Item description
– Own assumption
– Type of fault
– Preceding unusual occurences
Repair address:
weinor GmbH & Co. KG
Mathias-Brüggen-Straße 110
50829 Köln
Deutschland / Germany
Fon: +49 221 5 97 09-211 If you need a contact person
Fax: +49 221 5 97 09-898 outside Germany,
[email protected]
please visit our Website.
www.weinor.com
