上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
57
/
61
To adjust the positions of the two Y axes at the same time:
a. Select or enter a movement unit/step on the right side (0.01, 0.1, 1, or other
values).
b. Click
Y-
or
Y+
to move the Y axes in the positive or negative direction by the
selected or entered amount.
To adjust the position of one Y axis:
a. Set
Enable Level
to
ON
.
b. Select or enter a movement unit/step on the right side (0.01, 0.1, 1, or other
values).
c. Click
Y-
or
Y+
to move the Y axis in the positive or negative direction by the
selected or entered amount. Click
Y2-
or
Y2+
to move the Y2 axis in the
positive or negative direction by the selected or entered amount.
The Y-axis and Y2-axis coordinates after jiggling are displayed in the
Feedback
area.
Note: After jiggling the Y axes, you need to set datum or make them go to the mechanical
origin.
10.6 Calibration
If the motor feedback coordinates are different from the mechanical coordinates, you can
manually calibrate the axes to synchronize the actual position of the absolute encoder and
update the mechanical coordinates by reading the encoder feedback.
Follow the step below to manually calibrate the axes:
In the menu bar, go to
Machine
>
Adjustment
and select the target axis.
10.7 Going to Workpiece Origin
Making the axes go to the workpiece origin means to make the X axis and Y axis move to
the workpiece origin from their current positions and make the Z axis move to the safe
height (determined by the
Safe Height
parameter value) from its current position.
Follow the step below to make the axes go to workpiece origin:
In the menu bar, go to
Machine
>
To Work Zero
.