上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
55
/
61
Create A Desktop Shortcut
: Whether to create a software shortcut on the desktop.
Start The Software After Installation
: Whether to automatically start the software
after installation is complete.
1. Click
Pack up
.
After generating an installation package, you can find it under the selected path.
10.2 Using Handwheel
In
Auto
mode, you can use a handwheel to control machining speed and avoid tool
damage caused by loading wrong programs.
A WEIHONG handwheel is shown below:
Follow the steps below to use a WEIHONG handwheel for machining control:
1. In
Auto
mode, select one from the following methods to enter handwheel mode:
o
In the operation button bar, click
HW Guide
.
o
In the menu bar, go to
Machine
>
HW Guide
.
2. Rotate the step knob to select the movement unit (step).
X1, X10, and X100 represent steps of 0.001 mm, 0.01 mm, and 0.1 mm
respectively.
3. Rotate the axis knob to select the target axis.
4. Rotate the handwheel control knob clockwise to run the machining program.
The program running speed is determined by how fast you rotate the handwheel
control dial.
10.3 Dual-Y Origin Detection
This function can be used when your machine has two Y axes that use incremental
encoders.
Before executing origin detection for the Y axes, you need to manually level the Y axes.
Execute origin detection to record the distance between the origins of the Y axes. Use the
recorded value when making the Y axes go to the mechanical origin to ensure that the Y
axes are still leveled.
Follow the step below to execute origin detection for the Y axes:
In the menu bar, go to
Machine
>
Double Y Origin Detection
.
10.4 Jiggle
This function is used to adjust the cutter position to find the best cutting distance. Jiggle
settings are applicable to the current machining task and will lose effect after machining is
stopped.
Before jiggling the cutter:
