上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
20
/
61
Select one from the following methods to make the axes go to the mechanical origin:
In
Homing
mode, click
X Homing/Y Homing/Z Homing
in the operation button bar
to make the X/Y/Z axis go to the mechanical origin. You can also click
All Homing
to make all the axes to the mechanical origin in the sequence of Z axis, X axis and
Y axis.
In the menu bar, go to
Machine
>
Homing
to open the
Home
dialog box:
To make the
Home
dialog box automatically displayed when the software is started,
tick
Dialog box pops up when cycle
starts
at the dialog box lower left corner.
o
To make the X/Y/Z axis go to the mechanical origin, click
X axis(X)/Y
axis(Y)/Z axis(Z)
.
o
To make all axes go to the mechanical origin, click
All Axes(A)
.
o
To set the current position as the mechanical origin: Ensure that the current
position is consistent with the mechanical coordinates and there was no
cases that may cause coordinate error, such as machine power-off or
emergency stop. Click
DirectSet
.
