WEIGL ProCommander AX, Instruction Manual, Page: 66 / 95

66
Control.ini
3
rd
line: If input 1 is closed ( !i1c ) and the value of variable 1
is equal 1 ( !vcc1=1 ), then the second show (002_SHOW.WM1)
will start in restart mode ( !rst2 ).
4
th
line: If input 1 is closed ( !i1c ) and the value of variable 1 is
equal 2 ( !vcc1=2 ), then the third show (003_SHOW.WM1) will
start in restart mode ( !rst3 ).
5
th
line: If input 1 is closed ( !i1c ) and the value of variable 1
is equal 3 ( !vcc1=3 ), then the fourth show (004_SHOW.WM1)
will start in restart mode ( !rst4 ).
6
th
line: If input 1 is closed ( !i1c ) and the value of variable 1 is
equal 4 ( !vcc1=4 ), then the first show (005_SHOW.WM1) will
start in restart mode ( !rst5 ).
7
th
line: If the value of variable 1 is equal 4 ( !vcc1=4 ),
then variable 1 will attain the value zero ( !vmc1=0 ). If the
pushbutton is activated again the whole process will start from
the beginning.
ATTENTION!
If you want to learn more about how to write a
correct control.ini, please check also other case
studies on
Weigl Support and Solutions Center .