WEIGL ProCommander AX, Instruction Manual, Page: 57 / 95

57
Control.ini
The content of the Control.ini file can look like this:
!i1c!ess1001#
!i3o!epf1%20<2.5#
!i4t!epl1_4%50#
!i5c!cfm0<5#
!i5o!cfm32<5#
!tm01:20!rsn:\SHOW\001_SHOW.WM1#
!t&05:00!rsn2#
1
st
line: If input 1 is closed ( !i1c ), the open collector outputs
1 and 4 will be activated ( !ess1001 ).
2
nd
line: If input 3 is open ( !i3o ), then PWM output 1 fades
within 2.5 seconds to 20% ( !epf1%20<2.5 ).
3
rd
line: With every level change of input 4 ( !i4t ), the PWM
value of outputs 1 to 4 are set to 50% ( !epl1_4%50 ).
4
th
line: If input 5 is closed ( !i5c ), the volume fades to level 0
within 5 seconds ( !cfm0<5 ).
5
th
line: If input 5 is open ( !i5o ), the volume fades in within 5
seconds to that value which is stored in EE-Prom ( !cfm32<5 ).
6
th
line: At 1 minute and 20 seconds after switching on the
device or after insertion of the microSD card ( !tm01:20 ), the
first show starts in normal mode ( !rsn:\SHOW\001_SHOW.
WM1 ).
7
th
line: Every 5 minutes ( !t&05:00 ) the second show starts
in normal mode ( !rsn2 ).