PRODUCT MAINTENANCE
Do not expose the Vibration Exercise Machine to direct sunlight or in places with extreme heat in
order to avoid the machine cracked or the color faded.
Please cover it with a dust cover and disconnect the power plug from the electrical outlet if the
Vibration Exercise Machine is not to be used for a long time.
Do not use benzene thinner and corrosive and volatile detergent such as alcohol and gasoline to
clean the device. This may result in the color fade or cause the interior structure to get corrosive
and crack.
Please wipe the remote control with dry cloth. Wet cloth may result in malfunction.
CARE AND MAINTENANCE
WARNING!
Before cleaning or carrying out any maintenance on your Vibration Exercise Machine, ensure the power
is turned off and the power cord is removed from the plug socket.
CLEANING
Clean your Vibration Exercise Machine with a damp cloth and mild detergent only, immediately after
use. Use a weak solution of anti-bacterial washing up liquid in warm water and a microfiber cloth. Be
sure to wring out the cloth so that it is just damp.
STORAGE
Regularly check the cord/cable for damage before storing. Should the cord/cable be damaged in any
way it must ONLY be replaced by an identical cable of the same type and specification. Never pull the
cord/cable to disconnect from the power outlet. Always grasp the plug and pull to disconnect.
Remove the plug when not in use and store it.
TROUBLESHOOTING
Error
Error Correction
Check if the machine is plugged in and switched on
Check if the socket works with an alternative
electrical product
Point the remote control's transmitter directly at the
display's sensor
Replace the batteries (2x AAA)
No lights; does not respond to control panel or
remote control
Remote control does not work but the display is
working
5
