![background image](http://html1.mh-extra.com/html/weighsouth/wsi-602/wsi-602_instruction-manual_952483007.webp)
Installation
RS-232 Connecter (selectable)
USB Connecter (selectable)
Adaptor Jack
Calibration switch
•
Place the scale on a table.
• Connect the adaptor pin in to the scale adaptor jack. Adaptor
jack is located on therear side of the scale.
•
Adaptor connects into your AC power
socket.
• Turn on the On/Off key. If you want to
turn off, press the key again.
•
Display will be show the version number
and will be starting self checking.
• After self checking, display will be come to normal weighing
mode.
•
Warm-up time of 15 minutes stabilizes the measured values
after switching on.
•
Calibrate with exact calibration weights, minimum 1/3 of
the scale capacity needed for calibration. For calibration see
details in parameter.
Scale is now ready for operation/ use.
Summary of Contents for WSI-602
Page 1: ...WeighSouth WSI 602...
Page 20: ......