WEIGHSOUTH WSI-602, Instruction Manual

Page: 11 / 20

6.5 Hold function
Press before placing load on the platform, so
HOLD is active "Hold " and "-----" appear on the display.
After putting load on the platform no reading will be
available until a stable non-zero weight is detected. During this
period "----" is indicated. You will hear an acoustic beep, when
stable weight is detected.
Indication of calculated HOLD-value with small
"HOLD" in display the unit “kg” is displayed.
After unloading the platform the value is indicated for
10 Seconds. After that normal weight display is resumed.
Pressing , while the HOLD-function is active, will
cancel it.
6.6 BMI function
Press key on the weighing mode, display will show the last
height “xxxxxx”, use key to change digit, and press key to
increase the value, press key confirm it, display will enter into
the BMI mode, “BMI” indicator will be shown, stand on the
platform, display will show the BMI value and the BMI bar,
Press key will turn back to weighing mode
6.7 Precision*10
If you want to see more accurate weight value, press and
hold for 2 seconds, display will show one more decimal place,
the last digit will blink for 5 seconds, then it will go back to normal
weighing mode.