Initial Start-up
Warm-up time of 15 minutes stabilizes the measured values after
switching on.
6. OPERATION
6.1 Power ON/OFF
6.2 Zero
6.3 Tare
Switch on the scale by pressing
. The display is switched on and
the self test is started.
If you want to switch off press the key again.
Environmental conditions can lead to the balance exactly zero in
spite of the platform not taking any strain. However, you can set the
display of your balance to zero any time by pressing
key and
therefore ensure that the weighing starts at zero.
The weight of any container can be tared by pressing
key so
that with subsequent weighing the net weight of the object being
weighed is always displayed
•
Load weight on the pan.
•
Press
key. Zero is displayed, and tare is subtracted.
•
Remove weight from the platform. Tared weight is
displayed. It can set only one tare value. It can display
with a minus value.
•
Press
key. Zero is displayed, tare weight is cleared.
6.4 Change unit
In weighing condition, you can press
to change the unit: kg /
lb.
Summary of Contents for WSI-602
Page 1: ...WeighSouth WSI 602...
Page 20: ......